High/1 (level sensitive) = Show subpage Low/0 = Close subpageĬauses the legend to display in the active state for as long as the input is high. When the input goes low, this closes the subpage. High/1 (rising edge) = Return page Low/0 = No effectĭisplays the subpage for as long as the input is high. High/1 (rising edge) = Display page Low/0 = No effectĭisplays the previous (most recently viewed) page on the rising edge of the input. Typically all page inputs should be interlocked to ensure that the panel will return to the most recently viewed page after communication is re-established. If the signal is latched high, then on power-up or any re-established communication the XPanel will return to the page. High/1 (level sensitive) = Activate feedback Low/0 = Release feedbackĭisplays the page on the rising edge of the input. High/1 = WAV file playing Low/0 = WAV file not playingĬauses the button to display in the active state for as long as the signal is high.
The signal remains high for as long as the WAV file is playing. High/1 = Slider dragged Low/0 = Slider released The signal remains high for as long as the slider is dragged. Indicates that the slider is being dragged. High/1 = Button clicked Low/0 = Button released The signal remains high for as long as the button is in the active state. Indicates that the button has been clicked and is thus in the active state. Table 1 is organized according to the inputs and outputs on the symbol detail Table 2 is organized according to the VT Pro-e object being programmed. The following tables show how join numbers selected in VT Pro-e map to signals on the TPS-6000 symbol. The look and feel of the XPanel project is the same as a Crestron TPS Ethernet panel. Returned will be the Cresdb version.XPanel is Crestron's implementation of e-Control 2 technology, allowing a PC to be used like a Crestron Ethernet touchpanel. Returned will be the Cresdb version.ģ) Open VTPro and select. Returned will be the Cresdb version.Ģ) Open the Engraver software and select. To verify/ check which Crestron Database version is installed perform the following:ġ) Open SimplWindows* and select. Note: * Also returned will be the and the.
įor example, SimplWindows, VTPro, D3Pro, System Builder, Toolbox, Viewport, Engraver, Roomview*, Deal, iLux Designer all report this way. By default, the software is installed within a newly created folder which can be located by selecting the in the bottom left and then. Returned will be the version of Software. Returned will be the version of Toolbox along with if you scroll down the page all the Latest versions of all other Crestron Software installed on your PC.Ģ) If not running Toolbox yet, Simply open the Crestron Software application in question and then select and then. To verify/ check which version of Crestron Software is installed on your PC:ġ) If you have Toolbox installed simply open it and select,
0 kommentar(er)
